Dimensions: 1000mm x 1000mm
Thicknesses Available: 20mm
Colour: Light Grey/Dark Grey
Tolerances: length + width + 1.5%, thickness 2mm
Surface: Cut from high density rubber roll flooring, 70% EPDM and 30% SBR
Base: Made from recycled rubber and EPDM
Properties: Tough elastic, high compression resistance and impact strength
Toplayer: Approx 1.100kg/M3
Sublayer: Approx 1.000kg/M3
Shock Absorption: 61%
Head injury: 1.3m
Warranty: 3 Years
Cross Fit, Functional Training, Strength & Conditioning, Medium to Heavy Weights
Can be loose laid or glued using adhesive. The rubber can be cut to size using a utility knife.
The elastic tiles are produced under high temperatures and will shrink after production. This means that there is always a dimension tolerance on length, width and thickness. Due to the different dimensions of the tiles, we advise installing the tiles 'half brick wise' and not corner to corner. It is important that the outer tiles are fixed between a wall or profile so that all tiles can be placed under compression. Similarly, we recommend a small overlap of 1cm on every 5 tiles. After completion of the area, the tiles will squeeze together dissolving the small gaps.
The sub-floor requires to be level, firm and dry.
Depending on traffic, the tiles can be kept clean by a standard vacuum cleaner and damp mop. Cleaning machines can be used but should have the correct pads for rubber flooring to prevent abrasion. A PH neutral cleaner with warm water should only be used and not solvent-based detergents. Newly installed floors would benefit from a degreaser in the first few weeks. Please find guide here